Many many many years ago i brought a set of ChromeMoly (allegedly) wishbones with uniballs from an old friend.He had made them for his Rallycar but never got to use them… so i got my hands on them and mounted […]

Wiring, the least favorite part of anybodies racecar build.But still very essential, and many people has lost their race with faulty wiring so it is important to do this right the first time. Actually this is the second time but […]

Ok, i now get why most guys swap an M50/M52/S5x into their E36 chassis.That’s mostly plug and play, all off the shelve parts… i get none of that with the SAAB B204 engine! So we had to fabricate our own […]

Never thought this would happen but i got a piece about this project in a Dutch racing magazine called start84!super stoked about it. For those who understand Dutch, it’s their June 2020 issue 😉

With all the COVID-19 missery around us, I spend the last 4 days in my shed working on the HateGenerator. Finishing of the big gaping hole in the firewall, so my car is now compliant with regulations again.. and safe.Also […]

We got a new location to work out our hate generating car stuff!It’s a pity it’s only for 2 or 3 years… but should be enough to finish building our company car 🙂 Also, we got a sister car, a […]

First off i want to apologize for the hideous welds!I find it super tricky to weld thin sheet metal with a stick!I should really really really practice more… anyway, there is some progress to report.I’ve started with closing up the […]

Heat is the number 2 enemy of any racecar. (number 1 enemy is brakes)It’s justed energy going to waste. Those of you who paid attention to the physics lessons at school know that any gas flows faster when the hotter.Keeping […]

Ever since starting the SAAB B204 Turbo swap I wanted to change the fuel lines.Any stock road car will have the fuel lines under the floor for safety reasons (soaked carpet if leaking etc), but with racecars it is dangerous […]

Since the engine sits somewhat where i want it to be it was time to think about enginemounts. And luck would have it, i had a few days free from work so i fired up my trusty old CAD program! […]